Call (612) 703-3431 To Schedule Your Free Inspection Today

A roof replacement isn't just about putting down new shingles—it is a complete overhaul of your home’s primary defense system. When a roof reaches the end of its useful life, suffers widespread storm damage, or develops systemic failures, a targeted repair is no longer enough.
Our roof replacement process involves a full tear-off of your existing materials right down to the bare wood, allowing us to inspect and rebuild every single layer from the decking up to the ridge cap.
Age of the Roof: Most asphalt shingle roofs last between 15 to 25 years. If yours is approaching or past this window, it's time to replace it before major leaks develop.
Widespread Shingle Damage: Extensive curling, cracking, bald spots (losing protective granules), or completely missing shingles across multiple sides of the roof.
Frequent, Recurring Leaks: If you find yourself repairing different leaks every few months, the underlying system has failed.
Sagging Decking: Visual sagging on your roofline indicates potential structural rot in the decking below, which requires immediate attention.
Complete Tear-Off: We remove all old layers of shingles and underlayment down to the wood decking. We never layer new shingles over old ones.
Decking Inspection & Repair: We inspect the wood substrate for rot, water damage, or structural weakness, replacing damaged sheets to ensure a rock-solid foundation.
Underlayment & Ice/Water Shield Installation: We apply heavy-duty leak barriers in critical water-heavy zones (valleys, chimneys, eaves) and synthetic underlayment across the entire roof deck to prevent moisture penetration.
Flashing & Ventilation Upgrade: New flashing is installed around chimneys, walls, and pipes, and your attic ventilation system is optimized to prevent heat and moisture buildup.
Shingle & Ridge Cap Installation: We lay down high-quality shingles using precise fastening patterns, finishing with specialized ridge caps to seal the highest points of your home.
Final Cleanup & Inspection: We run high-powered magnetic sweeps to clear your property of nails and debris, leaving your yard exactly how we found it.
Roof Repair: Targeted work on a specific area of damage or failure, appropriate when the overall roof is structurally sound and the damage is isolated. Includes shingle replacement, flashing repair, pipe boot replacement, and valley repair.
Roof Inspection: A professional assessment of the full roofing system, including the decking, ventilation, flashings, and all layers of material. The basis for any honest recommendation about repair versus replacement. An inspection that stays on the ground is not an inspection.
Storm Damage Assessment: Post-storm inspection to identify hail damage, wind uplift, missing material, and compromised flashings. The basis for understanding the scope of any damage before any further steps are taken.

We get on the roof. Every inspection involves a physical evaluation of the shingles, flashings, pipe boots, ridge condition, and exposed decking edges. We check the attic for ventilation balance and signs of moisture damage. If you have been given a replacement recommendation from a contractor who evaluated your roof from the ground, you have not received a real inspection. You have received a sales visit.
After the inspection, we explain what we found and what it means. If the roof is repairable, we say so. If replacement is the right call, we show you why, walk you through every component of the scope, and explain what each line item is protecting against. The scope is custom to your specific roof, not a template adapted with your name at the top. This is the transparent sales process that defines how we operate.
Before any new material is installed, the full roof deck is inspected. Soft spots, delaminated sheathing, and improperly fastened decking are identified, photographed, and addressed. If decking replacement is needed, we communicate the scope and the cost before proceeding, not as a surprise addition at the end of the job. This is the step most shortcuts skip. It is also the step that determines whether the new roof performs as it should over time.
A complete replacement starts with the ice and water shield at every eave and valley, synthetic underlayment across the field, the specified shingle material properly fastened per manufacturer requirements, and new flashings at every penetration and transition. Ridge cap is installed with appropriate nailing pattern and alignment. Pipe boots are replaced, not reused. This is what a full system installation means. It is not the same as a shingle swap.
Before the crew leaves the job site, we verify that the intake and exhaust ventilation is functioning as designed. Blocked soffit vents from installation debris are a documented cause of post-installation ice dam problems. We check them. If a ventilation improvement is part of the scope, we confirm it is working. A roof that performs correctly through a Minnesota winter requires adequate airflow from day one.
Magnetic rollers collect nails from the lawn and driveway. The job site is clean before we leave. You get a walkthrough of the completed work with the same person who scoped the job and managed the installation. If a question comes up after we leave, there is one person to call and that call gets answered. This is not a standard we aspire to. It is the standard our reviews describe.
The honest answer depends on three things: the age of the roof, the extent of the damage, and the condition of the decking underneath. A roof under 15 years old with localized damage to a specific section is generally a good repair candidate, assuming the rest of the system is sound. A roof over 20 years old with granule loss across multiple sections, curling shingles, or multiple areas of failure is usually past the point where repair is a sound investment. The only way to know for certain is a professional inspection that gets on the roof and looks at the decking, the flashings, and the condition of the field shingles across the full surface. A contractor who recommends replacement without doing that inspection is not giving you an honest assessment.
The practical installation window in Minnesota runs from May through October, with most crews at peak capacity from June through August after spring storm season generates a surge in demand. September is often an underrated scheduling month because contractor availability opens up after the summer peak and weather conditions remain reliable. Winter installations are possible in mild conditions but require cold-weather adhesives and carry more scheduling risk. If your roof is showing signs of end-of-life condition in the fall, a professional inspection can help you determine whether the system will hold through one more winter or whether acting before spring is the more sound decision.
Ice dams are caused by uneven roof surface temperatures. Warm air escaping from the living space into the attic heats the upper portion of the roof deck, melting snow. That meltwater runs down toward the eaves, where the roof surface is cold because it overhangs the exterior wall, and refreezes. The accumulating ice ridge blocks additional drainage and forces water under the shingles. The root cause is almost always a combination of insufficient attic insulation and inadequate ventilation, not a roofing failure. Minnesota building code targets R-49 attic insulation and requires balanced soffit and ridge ventilation. A roofing contractor who replaces the roof without addressing the ventilation system is treating the symptom and leaving the cause. A properly built roof with correct ventilation does not guarantee ice-free winters, but it significantly reduces the conditions that allow dams to form.
Most standard residential roof replacements in the Chaska area are completed in one day by a professional crew. The single-day completion is worth understanding: when a roof is torn off in the morning, your home is exposed to weather until the installation is complete. A crew that finishes the job before leaving eliminates the risk of an unprotected roof overnight. The factors that extend a project beyond one day are roof size above a certain threshold, a steep pitch that requires additional safety rigging, and the discovery of decking damage that requires replacement before new material can be installed. A legitimate contractor will walk you through the expected timeline before the project starts and communicate any changes before they affect the schedule.
Ask for their Minnesota contractor license number and verify it independently through the Minnesota Department of Labor and Industry before signing anything. Ask for a certificate of liability insurance and workers compensation coverage, and confirm the certificates are current. Ask the contractor to walk you through the scope line by line and explain what each component is: decking inspection, ice and water shield coverage, underlayment type, shingle product and manufacturer, flashing replacement, ventilation plan, and workmanship warranty terms. A contractor who deflects on any of these questions or provides a number without a detailed written scope is worth approaching carefully. The lowest bid in a set of three estimates almost always reflects a scope that omits one of those components.
Your home deserves a contractor who cares as much as you do. We recognize that any home improvement project is a major investment on your part, and we vow to exceed your expectations. Call the Kangaroo today to schedule your free inspection, or click below to get started!
Fully Licensed & Insured MN: #bC730116 WI: #3101-DCFR
Copyright 2026. Joey Roofing and Siding . All rights reserved.